- Analytical Lab High Purity Water Purification Systems
- Product Detail
| Model | ZYCGF-I-60L | ZYCGF-II-60L | ZYCGF-III-60L | ZYCGF-IV-60L |
| Output(25°C)* | 60 liters/hour | |||
| Flow rate | Up to 1.8 liters/minute(with pressure tank) | |||
| Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |||
| RO water quality | ||||
| Conductivity At 25℃ | 2-10μs/cm | |||
| Ion rejection rate | 99% (new RO membrane) | |||
| Organic rejection rate | >99%, when MW>200 Dalton | |||
| Particles and bacteria rejection rate | >99% | |||
| High Purity water quality | ||||
| Resistivity(25°C) | 18.2MΩ.cm | |||
| Heavy metal ion | <0.1ppb | |||
| Bacteria | < 1cfu/ml | |||
| Particle(>0.2μm) | <1/ml | |||
| TOC Level*** | < 20 ppb | < 10 ppb | ||
| Dimension and weight | Length×Width×Height:530×400×590mm, 40Kg | |||
| Electrical requirements | AC210-240V, 50/60Hz | |||
| Power | 30W-50W | |||
| Terminal disinfection filter | N/A | yes | ||
| UV lamp | N/A | yes | ||
| UF | N/A | yes | ||
| Standard configuration | N/A | N/A | yes | |
| Can be selected flow rate | 40L/H, 60L/H, 80L/H,100L/H | |||
Typical Features of High Purity Water System:
1. Water Quality on-line monitoring; accurate and intuitive LCD panel digital display;
2. Polyethylene (PE) and polyacetal (POM) made pressure tank avoids secondary pollution;
3. Automatic water production and storage;
4. Produce RO pure water and UP ultra-pure water.
5. System flushing extends life span of reverse osmosis membrane
6. Pressure alarm display.
7. Automatic water quality alarm.
Working Conditions of High Purity Water System:
Feed water have certain requirements. Feed water quality and environmental changes affect system’s capacity. Failure to meet the requirements of feed water may result in contamination and damage to membrane components.
Source water : city tap water or groundwater
Minimum water supply pressure: 0.1-0.5MPa (pressure at minimum feed water flow rate.)
Water temperature: 5 ~ 35 ℃
PH range: 6 ~ 9
Solubility Total solids: TDS ≤ 200 mg / L (ppm)
Residual chlorine: ≤0.1mg / L (ppm)
Total iron: ≤0.1 mg / L (ppm)
Manganese: ≤0.5 mg / L (ppm)
Co2: <30 mg / L (ppm)
SDI: <5 mg / L (ppm)
Note: TDS >350mg / L ,the optional water softener should be taken into consideration.
Technical Process of Analytical Lab High Purity Water Purification Systems: 
The technical process is divided into source water pretreatment system,reverse osmosis system and ultra-pure system.
1. Source water pretreatment system: PP fiber filter + AC filter + Softener
2. Reverse osmosis system: It has high removal rate more than 99% for high valent ions, colloids, bacteria and organic matter (including endotoxin) with molecular weight greater than 300Dalton.
3. Ultra pure system: Ion exchange resin using H + exchange cation out the water in the filter ,using OH- exchange anions out the water , the replaced H + and OH- combined to produce H2O, ultra-purified column filling the United States Dow UPW-450 Ultra-pure water for nuclear grade resin, the water resistance of up to 18.2MΩ.cm.
Installation pictures of High Purity Water Purification Systems:
-
Sichuan Zhuoyue Water Treatment Equipment Co. is a integrated water treatment manufacturer with scientific research, design, production, sales, installation,after-sales services in Chengdu City, Sichuan Province, China, specializing in the production of laboratory ultra-pure water machine, medical water machine, pure /ultra-pure water equipment,water softener and other related water treatment equipment. Our 1500㎡modern is located in Rongzhi Innovation Industrial Park at Pixian modern industrial road, While 300㎡Sales Department office is located in Jinfu International Building, Jinniu District. Nowadays, the number of company staff is up to 100 and more. And also a complete after-sales service network is set up all over the country.
| Request Infomation |
| Recently viewed products |