FB-110Q3 high pressure homogenizer parameter:
1.Processing products: emulsion production
2.The process of product viscosity:< 2000 cPs
3.Maximum feed particle size:<500 microns
4.The highest feed temperature:<100 °C
5.Output (fixed): 100 L / h
6.Minimum single batch:1 L
7.Homogeneous series: first class
8.Design homogenization pressure: maximum 1500bar
9.Maximum working pressure:1200bar
10.Safety relief valve:1350bar
11.Pressure gauge: sanitary diaphragm pressure gauge
12.Main motor:5.5kW, 6, F IP55, Class.
13.Voltage and frequency : 50Hz,:400V, 3 phase
14.Loop circuit:24V, 50Hz
15.Level: health grade
16.Piston:2 only, ceramic system
17.Lubrication of mechanical components:Lubrication oil
18.Internal cooling: Fan
19.Fast connection for:Tri-Clamp connection
20.The highest temperature of cleaning:<90°C
21.The highest temperature of sterilization:<145°C
22.Washing / sterilization time:30 minutes
23.Water consumption of:100 L / h for cleaning / sterilization
24.Environmental conditions: ambient temperature 3-40 degrees C, the maximum humidity of 90% meters
25.Install outer dimension:L1210*W860*H1230mm
26. Host FOB Price To be advised
27.Host include:
1)Simulation type pressure gauge,
2)a homogeneous valve group,
3)manual or pneumatic pressure regulating module,
4)special kit,
5)standard spare parts,
6)text description.
28.delivery time: about 30~40 working days after payment
29.Payment: T/T and Trade Assurance
high pressure homogenizer Working principle:
Each machine has one or a plurality of reciprocating motion of the plunger, the material through the plunger pump suction and pressure, in the plunger under the action into pressure size adjustable valve group, after a certain width limit flow gap (workspace), transient voltage loss of material with high velocity (1000 to 1500 m / s) ejected, collision in the collision of the valve components of the ring, resulting in a three effect, so that the material can be uniformly refined to 100nm and broken cell rate is greater than 95%.
中文
