First, the main configuration, performance
◎ thin bench, only 6 cm thick.
Exhibition pieces embedded ◎ Ultra station, automatic recovery of more than wax.
◎ timer switch, single and working cycle mode, any setting.
◎ Hand optional anti-scald device.
◎ insulation cylinder with dual heating units and forceps, large melting wax cylinder.
◎ imported microcomputer chip, stable performance, temperature control, timing accurate.
◎ with automatic and manual switch and multi-parameter setting display.
◎ multi-temperature control, can control the master wax cylinder, holding tank, bench, injection wax tubes, tweezers, Taiwan and other parts of the heating temperature.
◎ hand and foot dynamic two-way control, injection wax, flexible and reliable.
◎ two paraffin precipitation filtration, non-blocking, leakage, dripping wax phenomenon.
◎ cooling units split Taiwan and embedded design
Meter, to avoid mutual interference temperature.
◎ LED low voltage lighting, three-tier security system, safe and reliable.
Second, the main technical parameters
Timer switch: single and working cycle mode, any set
Main wax cylinder volume: 5000ml
Holding tank capacity: 1500ml × 2
Embedded table size: 130mm × 105mm
Exhibition pieces slot size: 182mm × 60mm × 5mm
Table height: 60mm
Cooling range: room temperature ~ -20 ℃
Heating temperature range: room temperature ~ 99 ℃ arbitrary set, the error is less than ± 2 ℃
Total power: ≤ 800W
Details:www.zjhyyq.com
bio-equip.cn
中文
